marc/ddgo-controller-docs
1
0
Fork 0
mirror of https://github.com/marcriera/ddgo-controller-docs.git synced 2025-05-02 14:47:05 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions

Convert to Hugo

Browse source
This commit is contained in:
Marc Riera Irigoyen 2022-04-05 00:38:56 +02:00 • committed by Marc Riera
parent adb41bef4a
commit 13edcf14d1
33 changed files with 196 additions and 93 deletions
Download patch file Download diff file Expand all files Collapse all files

4
content/models/_index.md Normal file
View file

@ -0,0 +1,4 @@
---
title: "Models"
weight: 1
---

80
content/models/classic/_index.md Normal file
View file

@ -0,0 +1,80 @@
---
title: "Classic consoles"
weight: 1
---
The information in this section applies to the following controllers:
- **SLPH-00051:** two-handle controller (Sony PlayStation)
- **TC-5175290:** two-handle controller (Sega Saturn)
- **TCPP-20001:** single-handle controller (Sony PlayStation)
- **TCPP-20002:** gamepad controller (Sony PlayStation)
- **TCPP-20003:** two-handle controller (Nintendo 64)
- **TCPP-20004:** two-handle controller (Sega Dreamcast)
- **TCPP-20008:** two-handle controller, golden (Sony PlayStation)
These controllers all have five physical buttons (**SELECT**, **START**, **A**, **B**, **C**) and two handles (with the TCPP-20001 combining them into one). Internally, they use the same protocol as a standard controller for the corresponding console and input is reported in the data bytes corresponding to buttons (where each bit reports the state of a single button). Only the regular physical buttons have dedicated bits for them; the handles combine three and four bits for the power notches and brake notches, respectively (you can find an example with the Nintendo 64 [here](https://sites.google.com/site/consoleprotocols/home/nintendo-joy-bus-documentation/n64-specific/train-controller)).
## Power handle bit usage
The power handle uses a combination of three bits (buttons) to represent each notch. When using the TCPP-20001 controller, the equivalent of **N** is reported for power whenever a brake notch is applied.
| Position | POWER 1 | POWER 2 | POWER 3 |
|:----------:|:-------:|:-------:|:-------:|
| N | - | X | X |
| P1 | X | - | X |
| P2 | - | - | X |
| P3 | X | X | - |
| P4 | - | X | - |
| P5 | X | - | - |
| Transition | - | - | - |
## Brake handle bit usage
The brake handle uses a combination of four bits (buttons) to represent each notch. When using the TCPP-20001 controller, the equivalent of **Released** is reported for brake whenever a power notch is applied.
| Position | BRAKE 1 | BRAKE 2 | BRAKE 3 | BRAKE 4 |
|:----------:|:-------:|:-------:|:-------:|:-------:|
| Released | - | X | X | X |
| B1 | X | - | X | X |
| B2 | - | - | X | X |
| B3 | X | X | - | X |
| B4 | - | X | - | X |
| B5 | X | - | - | X |
| B6 | - | - | - | X |
| B7 | X | X | X | - |
| B8 | - | X | X | - |
| Unmarked 1 | X | - | X | - |
| Unmarked 2 | - | - | X | - |
| Unmarked 3 | X | X | - | - |
| Unmarked 4 | - | X | - | - |
| Unmarked 5 | X | - | - | - |
| Emergency | - | - | - | - |
| Transition | X | X | X | X |
The unmarked positions can be found between **B8** and **Emergency** and produce no click when moving the handle. When using the TCPP-20001 or the TCPP-20002, only the first and fourth unmarked positions are available.
## Button mapping to a standard controller
Because they use the same data bytes, the input between a Densha de GO! controller and a standard controller for each console can be matched as follows:
| Densha de GO! | Nintendo 64 | Sony PlayStation 1 | Sega Dreamcast | Sega Saturn |
|:-------------:|:-----------:|:------------------:|:--------------:|:-----------:|
| SELECT | R | SELECT | D | ?? |
| START | START | START | START | ?? |
| A | B | SQUARE | A | ?? |
| B | A | CROSS | ?? | ?? |
| C | L | CIRCLE | C | ?? |
| POWER 1 | RIGHT | TRIANGLE | Z | X |
| POWER 2 | UP | LEFT | Y | Y |
| POWER 3 | Z | RIGHT | X | Z |
| BRAKE 1 | C RIGHT | L1 | UP | L |
| BRAKE 2 | C LEFT | L2 | DOWN | R |
| BRAKE 3 | C DOWN | R1 | LEFT | DOWN |
| BRAKE 4 | C UP | R2 | RIGHT | LEFT |
This is useful when using a USB adapter to read the controller input from a PC.
## PlayStation-specific information
The controllers report the same data amount and structure as a standard digital PlayStation controller. UP and DOWN are pressed permanently. The games detect the controllers with these two buttons, as it is an impossible combination with a standard digital controller.

10
content/models/serial/_index.md Normal file
View file

@ -0,0 +1,10 @@
---
title: "Serial port"
weight: 2
---
The information in this section applies to the following controllers:
- **DGOC-44:** two-handle controller (Microsoft Windows)
This is the original controller for the Microsoft Windows releases. No details are available regarding internal functioning.

14
content/models/standalone/_index.md Normal file
View file

@ -0,0 +1,14 @@
---
title: "Standalone"
weight: 5
---
The information in this section applies to the following controllers:
- **Densha de GO! Plug and Play**
This controller is different from traditional controllers in the sense that it contains the game (an improved version of *Densha de GO! Final*) and does not connect to a PC or console. Externally, it looks similar to a TCPP-20009, except it does not include a pedal connection. Internally, it contains an ARM board running Linux. It requires a micro USB cable for power and a HDMI cable for video output.
The micro USB port supports USB OTG with a powered adapter and is used by Taito to install software updates.
It is possible to update the Linux kernel on the board to enable USB gadget mode and emulate traditional controllers, such as the [DGOC-44U](/models/usb/#dgoc-44u). This makes it possible to control other software. You can find more information [here](https://github.com/GMMan/dengo-plug-and-play-controller).

302
content/models/usb/_index.md Normal file
View file

@ -0,0 +1,302 @@
---
title: "USB"
weight: 3
---
The information in this section applies to the following controllers:
- **DGC-255:** one-handle controller (Microsoft Windows)
- **DGOC-44U:** two-handle controller (Microsoft Windows)
- **DRC-184/DYC-288:** Ryojōhen controller (Microsoft Windows)
- **TCPP-20009:** two-handle controller "Type 2" (Sony PlayStation 2)
- **TCPP-20011:** Shinkansen controller (Sony PlayStation 2)
- **TCPP-20012:** two-handle controller "Type 2", purple skeleton (Sony PlayStation 2)
- **TCPP-20014:** Ryojōhen controller (Sony PlayStation 2)
- **MTC:** Multi Train Controller (Sony PlayStation 2)
- **ZKNS-001:** one-handle controller (Nintendo Switch)
### DGC-255
This controller has one handle (5 power notches and 8+emergency brake notches), a D-Pad and 6 buttons (Select, Start, A, B, C, D).
Internally, it is a HID-compliant joystick with two axes, 6 buttons and a PoV hat switch (the handle positions are reported via axes).
Besides the PoV hat switch, it reports the same data as a DGOC-44U controller. The games check if the controller has a PoV hat switch to distinguish between a DGC-255 and a DGOC-44U.
### DGOC-44U
This controller has two handles (5 power notches and 8+emergency brake notches) and 6 buttons (Select, Start, A, B, C, D).
Internally, it is a HID-compliant joystick with two axes and 6 buttons (the handle positions are reported via axes).
| | |
|-----------------------------|-------------------------------------------|
| **Product name** | 電車でGO! コントローラ USB版 |
| **Manufacturer** | TAITO |
| **Vendor ID** | 0x0AE4 |
| **Product ID** | 0x0003 |
| **Serial number** | TCPP20009 |
| **USB standard descriptor** | Unavailable |
| **HID report descriptor** | [Link](descriptors/dgoc44u_hid-report-descriptor.txt) |
The controller sends reports to the host (PC) formed by 6 bytes:
| Byte 1 | Byte 2 | Byte 3 | Byte 4 | Byte 5 | Byte 6 |
|:------:|:------:|:------:|:-------:|:------:|:------:|
| Brake | Power | Null | Buttons | Null | Null |
The values for the brake notch byte are the following. There are 5 unmarked positions between **B8** and **Emergency**, but unlike classic controllers, they are all report the value for **Emergency**.
| Released | B1 | B2 | B3 | B4 | B5 | B6 | B7 | B8 | Emergency | Transition |
|:--------:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:---------:|:----------:|
| 0x79 | 0x8A | 0x94 | 0x9A | 0xA2 | 0xA8 | 0xAF | 0xB2 | 0xB5 | 0xB9 | 0xFF |
The values for the power notch byte are listed below.
| N | P1 | P2 | P3 | P4 | P5 | Transition |
|:----:|:----:|:----:|:----:|:----:|:----:|:----------:|
| 0x81 | 0x6D | 0x54 | 0x3F | 0x21 | 0x00 | 0xFF |
The button byte uses six bits to represent the state of the physical buttons. **0** means that the button is released and **1** that it is pressed.
| Button 1 | Button 2 | Button 3 | Button 4 | Button 5 | Button 6 |
|:--------:|:--------:|:--------:|:--------:|:--------:|:--------:|
| B | A | C | D | SELECT | START |
### DRC-184/DYC-288
No details are available regarding internal functioning.
### TCPP-20009/TCPP-20012
This controller has two handles (5 power notches and 8+emergency brake notches), a D-Pad and 6 buttons (Select, Start, A, B, C, D). In addition, it provides a door lamp and a 3.5 mm jack connector to plug a horn pedal. There are two rumble motors, one in each handle.
Internally, it is a HID device with a vendor-specific class.
| | |
|-----------------------------|-------------------------------------------|
| **Product name** | TAITO_DENSYA_CON_T01 |
| **Manufacturer** | TAITO |
| **Vendor ID** | 0x0AE4 |
| **Product ID** | 0x0004 |
| **Serial number** | TCPP20010 |
| **USB standard descriptor** | [Link](descriptors/tcpp20009_standard-descriptor.txt) |
| **HID report descriptor** | Unavailable |
#### Input
The controller sends reports to the host (PS2) formed by 6 bytes:
| Byte 1 | Byte 2 | Byte 3 | Byte 4 | Byte 5 | Byte 6 |
|:------:|:------:|:------:|:------:|:------:|:-------:|
| 0x01 | Brake | Power | Pedal | D-Pad | Buttons |
The values for the brake notch byte are the following.
| Released | B1 | B2 | B3 | B4 | B5 | B6 | B7 | B8 | Emergency | Transition |
|:--------:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:---------:|:----------:|
| 0x79 | 0x8A | 0x94 | 0x9A | 0xA2 | 0xA8 | 0xAF | 0xB2 | 0xB5 | 0xB9 | 0xFF |
The values for the power notch byte are listed below.
| N | P1 | P2 | P3 | P4 | P5 | Transition |
|:----:|:----:|:----:|:----:|:----:|:----:|:----------:|
| 0x81 | 0x6D | 0x54 | 0x3F | 0x21 | 0x00 | 0xFF |
The pedal byte has two possible values depending on the state of the pedal.
| Released | Pressed |
|:--------:|:-------:|
| 0xFF | 0x00 |
The D-pad byte represents the state of the arrow buttons. If two opposite directions are pressed simultaneously, the result is **Center** unless a third button is pressed.
| N | NE | E | SE | S | SW | W | NW | None/Center |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:-----------:|
| 0x00 | 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 |
The button byte uses six bits to represent the state of the physical buttons. **0** means that the button is released and **1** that it is pressed. A bitmask can be used to retrieve the buttons.
| Button 1 | Button 2 | Button 3 | Button 4 | Button 5 | Button 6 |
|:--------:|:--------:|:--------:|:--------:|:--------:|:--------:|
| B | A | C | D | SELECT | START |
#### Output
The controller supports receiving data via a control transfer to turn on/off the door lamp and provide rumble. The setup packet is as follows:
| bmRequestType | bRequest | wValue | wIndex | wLength |
|:-------------:|:--------:|:------:|:------:|:-------:|
| 0x40 | 0x09 | 0x0301 | 0x0000 | 0x0002 |
The data sent to the controller follows the structure below.
| Byte 1 | Byte 2 |
|:------:|:--------:|
| Status | Function |
* **Status:** defines whether the function specified in byte 2 is **Off** (**0x00**) or **On** (**0x01**).
* **Function:** **0x01** is **Left rumble**, **0x02** is **Right rumble**, **0x03** is **Door lamp**.
### TCPP-20011
This controller has two handles (13 power notches and 7+emergency brake notches), a D-Pad and 6 buttons (Select, Start, A, B, C, D). In addition, it provides a simple display, a door lamp and a 3.5 mm jack connector to plug a horn pedal. There are two rumble motors, one in each handle.
Internally, it is a HID device with a vendor-specific class.
| | |
|-----------------------------|-------------------------------------------|
| **Product name** | TAITO_DENSYA_CON_T02 |
| **Manufacturer** | TAITO |
| **Vendor ID** | 0x0AE4 |
| **Product ID** | 0x0005 |
| **Serial number** | TCPP20011 |
| **USB standard descriptor** | [Link](descriptors/tcpp20011_standard-descriptor.txt) |
| **HID report descriptor** | Unavailable |
#### Input
The controller sends reports to the host (PS2) formed by 6 bytes:
| Byte 1 | Byte 2 | Byte 3 | Byte 4 | Byte 5 | Byte 6 |
|:------:|:------:|:------:|:------:|:-------:|:------:|
| Brake | Power | Pedal | D-Pad | Buttons | Null |
The values for the brake notch byte are the following.
| Released | B1 | B2 | B3 | B4 | B5 | B6 | B7 | Emergency | Transition |
|:--------:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:---------:|:----------:|
| 0x1C | 0x38 | 0x54 | 0x70 | 0x8B | 0xA7 | 0xC3 | 0xDF | 0xFB | 0xFF |
The values for the power notch byte are listed below.
| N | P1 | P2 | P3 | P4 | P5 | P6 | P7 | P8 | P9 | P10 | P11 | P12 | P13 | Transition |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----------:|
| 0x12 | 0x24 | 0x36 | 0x48 | 0x5A | 0x6C | 0x7E | 0x90 | 0xA2 | 0xB4 | 0xC6 | 0xD7 | 0xE9 | 0xFB | 0xFF |
The pedal byte has two possible values depending on the state of the pedal.
| Released | Pressed |
|:--------:|:-------:|
| 0xFF | 0x00 |
The D-pad byte represents the state of the arrow buttons. If two opposite directions are pressed simultaneously, the result is **Center** unless a third button is pressed.
| N | NE | E | SE | S | SW | W | NW | None/Center |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:-----------:|
| 0x00 | 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 |
The button byte uses six bits to represent the state of the physical buttons. **0** means that the button is released and **1** that it is pressed. A bitmask can be used to retrieve the buttons.
| Button 1 | Button 2 | Button 3 | Button 4 | Button 5 | Button 6 |
|:--------:|:--------:|:--------:|:--------:|:--------:|:--------:|
| D | C | B | A | SELECT | START |
#### Output
The controller supports receiving data via a control transfer to update the screen, turn on/off the door lamp and provide rumble. The setup packet is as follows:
| bmRequestType | bRequest | wValue | wIndex | wLength |
|:-------------:|:--------:|:------:|:------:|:-------:|
| 0x40 | 0x09 | 0x0301 | 0x0000 | 0x0008 |
The data sent to the controller follows the structure below.
| Byte 1 | Byte 2 | Byte 3 | Byte 4 | Bytes 5-6 | Bytes 7-8 |
|:-----------:|:-----------:|:--------------------------:|:-----------:|:-----------:|:---------:|
| Left rumble | Right rumble| Door lamp + Limit approach | Speed gauge | Speedometer | ATC limit |
* **Left/right rumble:** **0x00** is **Off**, **0x01** is **On**.
* **Door lamp:** **0x0?** is **Off**, **0x8?** is **On**.
* **Limit approach:** values between **0x?0** and **0x?A** representing the number of LEDs lit above the speedometer. In-game, these mark the 10 km/h right below the speed limit.
* **Speed gauge:** values between **0x00** and **0x16** representing the number of LEDs lit on the speed gauge. LED #23 cannot be lit. In-game, these mark 15 km/h increments in the current speed, with one lit when speed is 1-15 km/h, two when 16-30 km/h, etc.
* **Speedometer:** values between **0x0000** and **0x0999** representing the current speed. Values are encoded with **BCD 8421** (i.e. **120 km/h** should be represented as **0x0120**, NOT **0x0078**).
* **ATC limit:** values between **0x0000** and **0x0999** representing the ATC speed limit. Values are encoded with **BCD 8421** (i.e. **120 km/h** should be represented as **0x0120**, NOT **0x0078**).
Multi-byte values should be stored in **Little Endian**.
### TCPP-20014
This controller has two handles (4 power notches and an analogue brake handle with three areas), a D-Pad and 7 buttons (Select, Start, Horn, Announce, Camera, Left doors, Right doors). In addition, it provides a 3.5 mm jack connector to plug a horn pedal.
Internally, it is a HID device with a vendor-specific class.
| | |
|-----------------------------|-------------------------------------------|
| **Product name** | TAITO_DENSYA_CON_T03 |
| **Manufacturer** | TAITO |
| **Vendor ID** | 0x0AE4 |
| **Product ID** | 0x0007 |
| **Serial number** | TCPP20014 |
| **USB standard descriptor** | [Link](descriptors/tcpp20014_standard-descriptor.txt) |
| **HID report descriptor** | Unavailable |
#### Input
The controller sends reports to the host (PS2) formed by 8 bytes:
| Byte 1 | Byte 2 | Byte 3 | Byte 4 | Byte 5 | Bytes 6-8 |
|:------:|:------:|:------:|:------:|:-------:|:---------:|
| Brake | Power | Pedal | D-Pad | Buttons | Unused |
Unlike traditional controllers, the brake handle is analogue and the brake byte reflects the position of the handle precisely. There are three areas with the ranges listed below, plus the emergency notch.
| Reduce pressure | Keep pressure | Increase pressure | Emergency |
|:---------------:|:-------------:|:-----------------:|:---------:|
| 0x23-0x64 | 0x65-0x89 | 0x8A-0xD6 | 0xD7 |
When using the controller with **Densha de GO! Professional 2** or **Densha de GO! Final**, the brake handle is interpreted as having 6 brake notches + emergency. The aproximate byte range for each notch is listed below (taken from **Densha de GO! Professional 2**).
| Released | B1 | B2 | B3 | B4 | B5 | B6 | Emergency |
|:---------:|:---------:|:---------:|:---------:|:---------:|:---------:|:---------:|:---------:|
| 0x23-0x2A | 0x2B-0x3C | 0x3D-0x4E | 0x4F-0x63 | 0x64-0x8A | 0x8B-0xB0 | 0xB1-0xD6 | 0xD7 |
The values for the power notch byte are listed below.
| N | P1 | P2 | P3 | P4 | Transition |
|:----:|:----:|:----:|:----:|:----:|:----------:|
| 0x00 | 0x3C | 0x78 | 0xB4 | 0xF0 | 0xFF |
The pedal byte has two possible values depending on the state of the pedal.
| Released | Pressed |
|:--------:|:-------:|
| 0xFF | 0x00 |
The D-pad byte represents the state of the arrow buttons. If two opposite directions are pressed simultaneously, the result is **Center** unless a third button is pressed.
| N | NE | E | SE | S | SW | W | NW | None/Center |
|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:-----------:|
| 0x00 | 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 |
The button byte uses seven bits to represent the state of the physical buttons. **0** means that the button is released and **1** that it is pressed. A bitmask can be used to retrieve the buttons.
| Button 1 | Button 2 | Button 3 | Button 4 | Button 5 | Button 6 | Button 7 |
|:--------:|:--------:|:--------:|:-----------:|:----------:|:--------:|:--------:|
| Horn | Announce | Camera | Right doors | Left doors | SELECT | START |
### MTC
No details are available regarding internal functioning.
### ZKNS-001
This controller has one handle (5 power notches and 8+emergency brake notches) and 16 buttons (the same as a Nintendo Switch Pro Controller, except the stick buttons).
Internally, it is a HID-compliant joystick mimicking a Nintendo Switch Pro Controller. The stick buttons and the right stick are unused, and only the Y axis of the left stick is used.
| | |
|-----------------------------|-------------------------------------------|
| **Product name** | One Handle MasCon for Nintendo Switch |
| **Manufacturer** | *None* |
| **Vendor ID** | 0x0F0D |
| **Product ID** | 0x00C1 |
| **Serial number** | *None* |
| **USB standard descriptor** | [Link](descriptors/zkns001_standard-descriptor.txt) |
| **HID report descriptor** | [Link](descriptors/zkns001_hid-report-descriptor.txt) |
The power/brake handle notches are reported in the Y axis of the left stick. There are no transition values between notches. In addition, when the handle is set to **Emergency**, **ZL** is pressed.
| Emergency | B8 | B7 | B6 | B5 | B4 | B3 | B2 | B1 | N | P1 | P2 | P3 | P4 | P5 |
|:---------:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|:----:|
| 0x00 | 0x05 | 0x13 | 0x20 | 0x2E | 0x3C | 0x49 | 0x57 | 0x65 | 0x80 | 0x9F | 0xB7 | 0xCE | 0xE6 | 0xFF |

34
content/models/usb/descriptors/dgoc44u_hid-report-descriptor.txt Normal file
View file

@ -0,0 +1,34 @@
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x04, // Usage (Joystick)
0xA1, 0x01, // Collection (Application)
0x09, 0x01, // Usage (Pointer)
0xA1, 0x00, // Collection (Physical)
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x02, // Report Count (2)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0xC0, // End Collection
0x75, 0x08, // Report Size (8)
0x95, 0x01, // Report Count (1)
0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x05, 0x09, // Usage Page (Button)
0x19, 0x01, // Usage Minimum (0x01)
0x29, 0x06, // Usage Maximum (0x06)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x35, 0x00, // Physical Minimum (0)
0x45, 0x01, // Physical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x06, // Report Count (6)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x95, 0x02, // Report Count (2)
0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x75, 0x08, // Report Size (8)
0x95, 0x02, // Report Count (2)
0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
0xC0, // End Collection
// 63 bytes

42
content/models/usb/descriptors/tcpp20009_standard-descriptor.txt Normal file
View file

@ -0,0 +1,42 @@
0x12, // bLength
0x01, // bDescriptorType (Device)
0x10, 0x01, // bcdUSB 1.10
0xFF, // bDeviceClass
0x04, // bDeviceSubClass
0x00, // bDeviceProtocol
0x08, // bMaxPacketSize0 8
0xE4, 0x0A, // idVendor 0x0AE4
0x04, 0x00, // idProduct 0x04
0x02, 0x01, // bcdDevice 2.02
0x01, // iManufacturer (String Index) "TAITO"
0x02, // iProduct (String Index) "TAITO_DENSYA_CON_T01"
0x03, // iSerialNumber (String Index) "TCPP20010"
0x01, // bNumConfigurations 1
0x09, // bLength
0x02, // bDescriptorType (Configuration)
0x19, 0x00, // wTotalLength 25
0x01, // bNumInterfaces 1
0x01, // bConfigurationValue
0x00, // iConfiguration (String Index)
0xA0, // bmAttributes Remote Wakeup
0xFA, // bMaxPower 500mA
0x09, // bLength
0x04, // bDescriptorType (Interface)
0x00, // bInterfaceNumber 0
0x00, // bAlternateSetting
0x01, // bNumEndpoints 1
0x03, // bInterfaceClass
0x00, // bInterfaceSubClass
0x00, // bInterfaceProtocol
0x00, // iInterface (String Index)
0x07, // bLength
0x05, // bDescriptorType (Endpoint)
0x81, // bEndpointAddress (IN/D2H)
0x03, // bmAttributes (Interrupt)
0x08, 0x00, // wMaxPacketSize 8
0x14, // bInterval 20 (unit depends on device speed)
// 43 bytes

42
content/models/usb/descriptors/tcpp20011_standard-descriptor.txt Normal file
View file

@ -0,0 +1,42 @@
0x12, // bLength
0x01, // bDescriptorType (Device)
0x10, 0x01, // bcdUSB 1.10
0xFF, // bDeviceClass
0x05, // bDeviceSubClass
0x00, // bDeviceProtocol
0x08, // bMaxPacketSize0 8
0xE4, 0x0A, // idVendor 0x0AE4
0x05, 0x00, // idProduct 0x05
0x02, 0x01, // bcdDevice 2.02
0x01, // iManufacturer (String Index) "TAITO"
0x02, // iProduct (String Index) "TAITO_DENSYA_CON_T02"
0x03, // iSerialNumber (String Index) "TCPP20011"
0x01, // bNumConfigurations 1
0x09, // bLength
0x02, // bDescriptorType (Configuration)
0x19, 0x00, // wTotalLength 25
0x01, // bNumInterfaces 1
0x01, // bConfigurationValue
0x00, // iConfiguration (String Index)
0xA0, // bmAttributes Remote Wakeup
0xFA, // bMaxPower 500mA
0x09, // bLength
0x04, // bDescriptorType (Interface)
0x00, // bInterfaceNumber 0
0x00, // bAlternateSetting
0x01, // bNumEndpoints 1
0x03, // bInterfaceClass
0x00, // bInterfaceSubClass
0x00, // bInterfaceProtocol
0x00, // iInterface (String Index)
0x07, // bLength
0x05, // bDescriptorType (Endpoint)
0x81, // bEndpointAddress (IN/D2H)
0x03, // bmAttributes (Interrupt)
0x08, 0x00, // wMaxPacketSize 8
0x14, // bInterval 20 (unit depends on device speed)
// 43 bytes

42
content/models/usb/descriptors/tcpp20014_standard-descriptor.txt Normal file
View file

@ -0,0 +1,42 @@
0x12, // bLength
0x01, // bDescriptorType (Device)
0x10, 0x01, // bcdUSB 1.10
0xFF, // bDeviceClass
0xFF, // bDeviceSubClass
0x00, // bDeviceProtocol
0x08, // bMaxPacketSize0 8
0xE4, 0x0A, // idVendor 0x0AE4
0x07, 0x00, // idProduct 0x07
0x02, 0x01, // bcdDevice 2.02
0x01, // iManufacturer (String Index) "TAITO"
0x02, // iProduct (String Index) "TAITO_DENSYA_CON_T03"
0x03, // iSerialNumber (String Index) "TCPP20014"
0x01, // bNumConfigurations 1
0x09, // bLength
0x02, // bDescriptorType (Configuration)
0x19, 0x00, // wTotalLength 25
0x01, // bNumInterfaces 1
0x01, // bConfigurationValue
0x00, // iConfiguration (String Index)
0xA0, // bmAttributes Remote Wakeup
0xFA, // bMaxPower 500mA
0x09, // bLength
0x04, // bDescriptorType (Interface)
0x00, // bInterfaceNumber 0
0x00, // bAlternateSetting
0x01, // bNumEndpoints 1
0x03, // bInterfaceClass
0x00, // bInterfaceSubClass
0x00, // bInterfaceProtocol
0x00, // iInterface (String Index)
0x07, // bLength
0x05, // bDescriptorType (Endpoint)
0x81, // bEndpointAddress (IN/D2H)
0x03, // bmAttributes (Interrupt)
0x08, 0x00, // wMaxPacketSize 8
0x14, // bInterval 20 (unit depends on device speed)
// 43 bytes

47
content/models/usb/descriptors/zkns001_hid-report-descriptor.txt Normal file
View file

@ -0,0 +1,47 @@
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x05, // Usage (Game Pad)
0xA1, 0x01, // Collection (Application)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x35, 0x00, // Physical Minimum (0)
0x45, 0x01, // Physical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x0E, // Report Count (14)
0x05, 0x09, // Usage Page (Button)
0x19, 0x01, // Usage Minimum (0x01)
0x29, 0x0E, // Usage Maximum (0x0E)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x95, 0x02, // Report Count (2)
0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x25, 0x07, // Logical Maximum (7)
0x46, 0x3B, 0x01, // Physical Maximum (315)
0x75, 0x04, // Report Size (4)
0x95, 0x01, // Report Count (1)
0x65, 0x14, // Unit (System: English Rotation, Length: Centimeter)
0x09, 0x39, // Usage (Hat switch)
0x81, 0x42, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State)
0x65, 0x00, // Unit (None)
0x95, 0x01, // Report Count (1)
0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x46, 0xFF, 0x00, // Physical Maximum (255)
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
0x09, 0x32, // Usage (Z)
0x09, 0x35, // Usage (Rz)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x75, 0x08, // Report Size (8)
0x95, 0x01, // Report Count (1)
0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x0A, 0x4F, 0x48, // Usage (0x484F)
0x75, 0x08, // Report Size (8)
0x95, 0x08, // Report Count (8)
0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
0x0A, 0x4F, 0x48, // Usage (0x484F)
0x91, 0x02, // Output (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
0xC0, // End Collection
// 94 bytes

57
content/models/usb/descriptors/zkns001_standard-descriptor.txt Normal file
View file

@ -0,0 +1,57 @@
0x12, // bLength
0x01, // bDescriptorType (Device)
0x00, 0x02, // bcdUSB 2.00
0x00, // bDeviceClass (Use class information in the Interface Descriptors)
0x00, // bDeviceSubClass
0x00, // bDeviceProtocol
0x40, // bMaxPacketSize0 64
0x0D, 0x0F, // idVendor 0x0F0D
0xC1, 0x00, // idProduct 0xC1
0x06, 0x01, // bcdDevice 2.06
0x00, // iManufacturer (String Index)
0x02, // iProduct (String Index) "One Handle MasCon for Nintendo Switch"
0x00, // iSerialNumber (String Index)
0x01, // bNumConfigurations 1
0x09, // bLength
0x02, // bDescriptorType (Configuration)
0x29, 0x00, // wTotalLength 41
0x01, // bNumInterfaces 1
0x01, // bConfigurationValue
0x00, // iConfiguration (String Index)
0x80, // bmAttributes
0xFA, // bMaxPower 500mA
0x09, // bLength
0x04, // bDescriptorType (Interface)
0x00, // bInterfaceNumber 0
0x00, // bAlternateSetting
0x02, // bNumEndpoints 2
0x03, // bInterfaceClass
0x00, // bInterfaceSubClass
0x00, // bInterfaceProtocol
0x00, // iInterface (String Index)
0x09, // bLength
0x21, // bDescriptorType (HID)
0x11, 0x01, // bcdHID 1.11
0x00, // bCountryCode
0x01, // bNumDescriptors
0x22, // bDescriptorType[0] (HID)
0x5E, 0x00, // wDescriptorLength[0] 94
0x07, // bLength
0x05, // bDescriptorType (Endpoint)
0x02, // bEndpointAddress (OUT/H2D)
0x03, // bmAttributes (Interrupt)
0x40, 0x00, // wMaxPacketSize 64
0x0A, // bInterval 10 (unit depends on device speed)
0x07, // bLength
0x05, // bDescriptorType (Endpoint)
0x81, // bEndpointAddress (IN/D2H)
0x03, // bmAttributes (Interrupt)
0x40, 0x00, // wMaxPacketSize 64
0x0A, // bInterval 10 (unit depends on device speed)
// 59 bytes

10
content/models/wii/_index.md Normal file
View file

@ -0,0 +1,10 @@
---
title: "Nintendo Wii"
weight: 4
---
The information in this section applies to the following controllers:
- **TCPP-20017:** Shinkansen controller
This controller is similar externally to the PlayStation 2 version of the Shinkansen controller. However, the screen has been replaced by a sticker and there is no pedal, so the only functioning parts are the handles, the buttons and the door lamp. In addition, instead of USB, it connects to a Wiimote using its extension port, like other accessories made for the console. No details are available regarding internal functioning.