mirror of
https://github.com/marcriera/ddgo-pnp-controller.git
synced 2025-04-11 06:29:29 +02:00
66 lines
4.4 KiB
Markdown
66 lines
4.4 KiB
Markdown
# Controller mod for Densha de GO! Plug & Play
|
|
|
|
This mod allows you to use your Densha de GO! Plug & Play as a USB controller for other games.
|
|
|
|
## Requirements
|
|
|
|
- USB flash drive
|
|
- Powered micro USB OTG adapter
|
|
- Micro USB data cable
|
|
|
|
## Installation
|
|
|
|
1. Prepare the USB flash drive by formatting it with a single FAT32 partition.
|
|
2. Download the latest release from the [Releases](https://github.com/MarcRiera/ddgo-pnp-controller/releases) section.
|
|
3. Extract the content to the root of the USB drive.
|
|
4. Plug the USB drive to the OTG adapter, plug the adapter to the Plug & Play and plug the data cable to the adapter and a power source.
|
|
5. Turn on the Plug & Play. The door lamp will turn on to show the installation has begun. Once it has finished, the lamp will turn off. Turn off the unit and remove everything.
|
|
|
|
## Uninstallation
|
|
|
|
To completely remove the mod, follow these steps. **You need the backup of the original kernel created during installation**.
|
|
|
|
1. Prepare the USB flash drive by formatting it with a single FAT32 partition.
|
|
2. Download the latest release from the [Releases](https://github.com/MarcRiera/ddgo-pnp-controller/releases) section.
|
|
3. Extract the content to the root of the USB drive.
|
|
4. Create an empty file named `revert` on the root of the USB drive.
|
|
5. Put the original (backup) files `uImage` and `mali.ko` into a folder named `BACKUP` on the root of the USB drive.
|
|
6. Plug the USB drive to the OTG adapter, plug the adapter to the Plug & Play and plug the data cable to the adapter and a power source.
|
|
7. Turn on the Plug & Play. The door lamp will turn on to show the uninstallation has begun. Once it has finished, the lamp will turn off. Turn off the unit and remove everything.
|
|
|
|
## Usage
|
|
|
|
Connect the Plug & Play to a PC or console using the data cable. Press one of the following button combinations to select the controller you want to emulate:
|
|
|
|
| Controller | Button combination | Notes |
|
|
|-----------------------------------------|--------------------------|--------------------------------------------------|
|
|
| One handle controller (Nintendo Switch) | UP | SELECT+START=HOME, SELECT+LEFT=L, SELECT+RIGHT=R |
|
|
| Two handle controller (PC) | RIGHT | D-Pad is mapped to SELECT+ABCD |
|
|
| Two handle controller (PS1) | DOWN + Power handle at 0 | Hold D to disable handles and enable D-Pad |
|
|
| Two handle controller "Type 2" (PS2) | D | |
|
|
| Shinkansen controller (PS2) | B | Power notches are mapped to P2-P4-P7-P10-P13 |
|
|
| Multi Train Controller (PS2) - P4/B7 | C + Power handle at 0 | SELECT+A=A2, SELECT+D=ATS, SELECT+D-Pad=Reverser |
|
|
| Multi Train Controller (PS2) - P4/B2-B7 | C + Power handle at 1 | SELECT+A=A2, SELECT+D=ATS, SELECT+D-Pad=Reverser |
|
|
| Multi Train Controller (PS2) - P5/B5 | C + Power handle at 2 | SELECT+A=A2, SELECT+D=ATS, SELECT+D-Pad=Reverser |
|
|
| Multi Train Controller (PS2) - P5/B7 | C + Power handle at 3 | SELECT+A=A2, SELECT+D=ATS, SELECT+D-Pad=Reverser |
|
|
|
|
Hold the buttons until the controller vibrates to confirm selection. If no button is pressed, you can play with the Plug & Play as usual.
|
|
|
|
If you need more information regarding each controller and supported software, please check the [Densha de GO! controller documentation](https://marcriera.github.io/ddgo-controller-docs).
|
|
|
|
## RNDIS access (advanced users)
|
|
|
|
When no controller is selected, RNDIS access is enabled in the device. You can access SSH on the Plug & Play at 169.254.215.100. SFTP is not supported out of the box, but SCP is available. Keep in mind the root filesystem is mounted read-only by default.
|
|
|
|
## Notes
|
|
|
|
- During the first installation, if no previous mods are detected, the device's original kernel is backed up to a folder named *BACKUP* in the root of the USB drive. Copy its contents to a safe location.
|
|
- If detected, the [original mod by GMMan](https://github.com/GMMan/dengo-plug-and-play-controller) will be uninstalled to avoid conflicts.
|
|
|
|
## Compilation
|
|
|
|
To compile the program yourself, you will need Rust and toolchain for Armv7-A. The easiest way is to install [cross](https://github.com/cross-rs/cross) and run:
|
|
|
|
```cross build --target arm-unknown-linux-musleabi --release```
|
|
|
|
The Linux kernel source can be found [here](https://github.com/MarcRiera/dengo-plug-and-play-kernel).
|